Commercial Buy to Let and Investment Mortgages
Commercial investment mortgages from £250,000 on let shops, offices, industrial and mixed use property. 60% to 75% LTV, SPV lending, no broker fee.
Last updated: 6 November 2026
A commercial investment mortgage is a long-term loan to buy or refinance commercial property let to tenants, such as shops, offices, industrial units or mixed use buildings, repaid from the rent. Lenders typically advance 60% to 75% of value, sized on rental cover. We arrange commercial buy to let finance from £250,000 across England, Scotland* and Wales.
£250,000
60% to 75%
3 to 25 years
Around 1.2% over base
Individuals, ltd companies, SPVs
£0
What is a commercial investment mortgage?
A commercial investment mortgage, often called a commercial buy to let mortgage, is secured on commercial property that the borrower lets to third party tenants rather than occupies. The lender's main source of repayment is the rent, so the lease and the tenant matter as much as the building.
The property types we finance most often are high street and parade shops, office buildings, industrial and warehouse units, trade counters, mixed use buildings with a shop below and flats above, and multi-let portfolios that combine several of these. Investors range from individuals buying their first let unit to family companies and property funds refinancing portfolios worth tens of millions.
The distinction from an owner-occupier loan is the source of income. When a business buys its own premises, the lender underwrites the trading business. When an investor buys a let property, the lender underwrites the rent, the tenant's ability to keep paying it and how easy the building would be to re-let if the tenant left. Our owner-occupier commercial mortgages page covers the trading route, and the two are priced and assessed differently.
| Feature | Commercial investment mortgage | Owner-occupier commercial mortgage |
|---|---|---|
| Who occupies | Third party tenants | The borrower's own business |
| Repayment source | Rent under the leases | Trading profit of the business |
| Main affordability test | Interest cover ratio or debt service cover on the rent | EBITDA cover from business accounts |
| What the lender reads first | Leases, tenant covenant, rent roll | Three years of accounts |
| Typical maximum LTV | 60% to 75% | 65% to 75%, occasionally higher |
| Typical borrower | Individual investor, ltd company, SPV, pension fund | Trading company or its directors |
How do lenders work out how much you can borrow?
The loan is the lower of two figures: the maximum loan to value on the property, and the loan the rent can support at the lender's required interest cover or debt service cover ratio. On most let commercial property, rental cover sets the loan before loan to value does.
The interest cover ratio (ICR) compares the annual rent with the annual interest on the loan. A lender requiring 150% cover wants the rent to be at least one and a half times the interest. Some lenders test at the actual pay rate, others at a stressed rate a percentage point or two higher, and the stress matters a great deal when rates move. The debt service cover ratio (DSCR) does the same thing but includes capital repayments, so it is the stricter test on an amortising loan. Our DSCR guide explains both measures, and our guide to lender DSCR stress tests shows how the stressed rate changes the answer.
The rent the lender uses is the contracted rent under signed leases, sometimes capped at the valuer's view of market rent if the passing rent looks high. Vacant units contribute nothing on day one. Turnover rents, service charge income and rents from tenants in arrears are usually excluded. On multi-let property, lenders also look at the spread of income, because a building where one tenant pays 80% of the rent is a single-tenant risk however many leases it has.
What we see on almost every commercial investment case is that the borrower has worked out the loan from the loan to value and is surprised when the rental cover produces a smaller number. Run both tests before you agree a price, and if the rent will not support the debt, the deposit needs to rise or the structure needs to change.
What loan to value can you get on commercial investment property?
Expect 60% to 75% of market value, with the strongest lets on modern industrial and long leases to strong tenants reaching the top of the range, and secondary retail, offices with short leases and specialist property sitting lower.
| Property and lease | Typical maximum LTV | Lender appetite |
|---|---|---|
| Modern industrial or logistics, 5 years or more unexpired, good tenant | 70% to 75% | Strong across mainstream and challenger banks |
| Mixed use, shop with flats above | 70% to 75% | Strong, often semi-commercial lenders |
| High street retail, established tenant, 3 to 5 years left | 60% to 70% | Good in strong towns, selective elsewhere |
| Offices, multi-let, short leases | 55% to 65% | Selective, depends on location and EPC |
| Single let with under 2 years unexpired | 50% to 60% | Specialist, re-letting risk priced in |
| Part vacant or vacant investment | Bridging first, then term debt | Term lenders want income in place |
Indicative ranges from cases we see. Rates and lending criteria are subject to change by lenders without notice.
Higher loan to value is possible in some cases with additional security or a very strong tenant, and our 80% LTV commercial mortgages page explains when. For mixed use buildings with residential upper floors, our semi-commercial mortgages page covers the lenders that specialise in that property type.
Why does lease length and tenant covenant matter so much?
Because the lender is lending against an income stream, and the length of the lease and the financial strength of the tenant decide how secure that income is over the loan term. The valuation reflects both, and so does the lender's appetite.
Lenders talk about the weighted average unexpired lease term (WAULT) on multi-let property, which is the average time left on the leases weighted by rent. A long WAULT with break clauses well into the future supports higher gearing and better pricing. A short WAULT, or leases with tenant break options in the next year or two, means the lender has to consider what happens if the tenants leave, how long the space would take to re-let and at what cost.
Tenant covenant is the strength of the tenant as a payer. A national retailer, a public body or a listed company is a strong covenant. A start-up café on its first lease is a weak one. Lenders check tenant accounts at Companies House, credit scores and payment history, and on a single-let property they will often want to see two or three years of rent paid on time. Rent deposits and personal or parent company guarantees improve a weaker covenant.
Lease terms matter too. Full repairing and insuring (FRI) leases put repair and insurance costs on the tenant, which protects the landlord's net income. Leases outside the security of tenure provisions of the Landlord and Tenant Act 1954 make it easier to regain possession at the end, which some lenders like for redevelopment value and others dislike because the tenant can walk away more easily. On the cases we place, getting the leases in front of the lender early is the single biggest factor in avoiding late-stage surprises.
What are commercial investment mortgage rates?
Variable rates start from around 1.2% over Bank of England base rate for the strongest cases and typically sit at 2% to 4% over base, with fixed rates priced at application. Bank Rate is 4%, raised from 3.75% on 5 November 2026, with the next decision due on 17 December 2026.
The margin reflects the loan to value, the lease profile, the tenant strength, the property type and the borrower's experience and wider assets. A low loan to value on a long let industrial unit sits at the bottom of the range. A higher loan to value on secondary offices with short leases sits at the top. Arrangement fees of around 1% to 2% are normal, and fixed rates carry early repayment charges that step down over the fix. Our commercial mortgage rates guide tracks current pricing bands.
Rates and lending criteria are subject to change by lenders without notice.
Should you buy through a limited company or SPV?
Most commercial investors now buy through a limited company, often a special purpose vehicle (SPV) set up only to hold property, and almost every commercial lender is comfortable lending to one. The tax treatment is a question for your accountant, and the lending works either way.
Lenders will usually ask for personal guarantees from the directors and shareholders of an SPV, because a newly formed company has no accounts or assets of its own. They will look at the directors' experience, other property owned and personal financial position. Trading companies holding property, family investment companies, trusts and pension schemes can all borrow on commercial investment property, though trusts and pension schemes have their own documentation requirements. Overseas companies can borrow too, with a smaller lender pool, and our offshore company commercial mortgage page explains how.
Individuals can still buy in their own names, and for some smaller investors that is the simpler route. The commercial lender's assessment is broadly the same either way, because the rent is what services the debt.
Can you finance a commercial property portfolio?
Yes. Portfolio facilities secure several let properties under one loan or a set of linked loans, with one valuation exercise, one set of covenants and often better pricing than financing each building separately. They are the normal route for investors with several properties and loans above £1 million.
A portfolio lender looks at the total rent roll, the spread of tenants and sectors, the average loan to value and the borrower's track record. Diversification helps: a portfolio of twenty units let to fifteen tenants across industrial, retail and offices is lower risk than one large single let, even at the same value. Facilities can include the ability to release or substitute properties as the investor sells and buys, and on larger facilities a revolving element for acquisitions.
Our £40m commercial portfolio refinance case study shows a large portfolio restructured onto one facility, and our mixed use portfolio refinance in Surrey and Kent shows the same approach at a smaller scale. The refinancing a commercial portfolio guide covers timing and covenant tests.
Which lenders offer commercial investment mortgages?
High street banks, challenger and specialist banks, building societies with commercial teams, and specialist non-bank lenders all lend on let commercial property, each with its own appetite by sector, loan size and lease profile.
| Lender type | Where they fit | Typical trade-off |
|---|---|---|
| High street banks | Larger, lower geared investments with strong tenants and an experienced borrower | Best pricing, slower and stricter on covenants |
| Challenger and specialist banks | Most mainstream let commercial property, SPVs, mixed use, smaller investors | Slightly higher margins, more flexible on borrower profile |
| Building societies with commercial books | Mixed use and smaller commercial investments | Conservative LTV, good long fixes |
| Specialist non-bank lenders | Short leases, part vacancy, unusual property, complex ownership | Higher cost, faster and more flexible |
| Private banks | High net worth investors with wider assets under management | Relationship-led pricing, often interest-only |
The lender pool for commercial investment is large, and the rate a borrower is shown depends heavily on which lenders are approached and how the case is presented. Our commercial mortgage lenders compared guide sets out the main lender groups in more detail.
Worked example: rental cover on a let industrial unit
An investor buys a modern industrial unit for £800,000, let on a ten year FRI lease with six years unexpired at £60,000 a year, a yield of 7.5%. The lender offers up to 70% loan to value, requires 150% interest cover, and the illustrative pay rate is 6.5% (Bank Rate of 4% plus a 2.5% margin).
| Test | Calculation | Result |
|---|---|---|
| Loan to value cap | £800,000 x 70% | £560,000 |
| Rental cover cap | £60,000 / 1.5 / 6.5% | £615,385 |
| Maximum loan (lower of the two) | £560,000 | |
| Annual interest on £560,000 at 6.5% | £560,000 x 6.5% | £36,400 |
| Interest cover on interest-only | £60,000 / £36,400 | 165% |
| Capital and interest over 20 years | £4,175 a month | £50,103 a year, DSCR 1.20 times |
| Capital and interest over 25 years | £3,781 a month | £45,374 a year, DSCR 1.32 times |
Illustrative figures to show the arithmetic. 6.5% is not a quoted rate. Rates and lending criteria are subject to change by lenders without notice.
Here loan to value binds, and the rent comfortably covers interest. The interesting line is the debt service cover. Over 20 years the payments are covered 1.22 times, which falls below the 1.25 times many lenders want on an amortising loan. Moving to 25 years lifts cover to 1.35 times and the case works. If the same unit were let at £42,000 a year instead, the rental cover cap would fall to £448,000 (£42,000 / 1.5 / 6.25%), below the £560,000 loan to value cap, and rent would set the loan. That is the more common outcome on secondary property, and it is why we check both tests on the first call.
Our commercial mortgage calculator runs the payments for different terms and rates, and our £7m logistics unit in Dover case study shows a larger single-let industrial investment.
What happens when a lease is near expiry or the property is part vacant?
Term lenders want income in place, so a property with a lease ending inside the loan term or a large vacancy is lent on at lower loan to value, or bridged first and refinanced once it is let.
A lease ending in year three of a ten year loan is common and manageable. The lender will look at the likelihood of renewal, the market rent and how long re-letting would take, and may hold back some of the loan or require a rent cover reserve. A lease ending in the next six months on a single-let building is harder, and the realistic options are a lower loan, a short bridge until a new lease is signed, or a lender who prices for the re-letting risk. Our commercial bridging loans page covers the short-term route, and the bridge is refinanced onto an investment mortgage once the tenant is in.
The blunt truth is that an empty commercial building is valued and lent on as a project rather than an investment, however good the location. Buyers who pay an investment price for a property about to go vacant usually discover this at valuation.
How do you apply for a commercial investment mortgage?
Five steps, and most purchases complete in six to ten weeks, with the valuation and the lender's review of the leases setting the pace.
| Step | What happens | What you provide |
|---|---|---|
| 1. Property call | We look at the property, the rent, the leases and your plans, and run the loan to value and rental cover tests. | Address, price, rent roll, lease summaries |
| 2. Terms | We approach the lenders that suit the property and borrower and compare indicative terms with you. | Copies of leases, tenant details, your property schedule and assets and liabilities |
| 3. Valuation | The lender instructs a RICS valuer to report on market value, market rent and lettability. | Valuation fee, access, service charge and tenancy information |
| 4. Offer and legal work | The lender issues an offer and solicitors review title, leases and searches. The lender's solicitor reports on each lease. | Signed offer, solicitor instructed, company documents for an SPV |
| 5. Completion | Funds are released and the charge is registered, with any guarantees signed. | Completion statement, personal guarantees where required |
Before you apply, put together a one-page rent schedule showing each tenant, the rent, the lease start and end dates, break dates and any arrears. It is the first document every lender asks for, and the speed of the whole case often depends on it.
What is the market doing for commercial investment property?
Investor interest is recovering slowly, with sentiment strongest for prime industrial and office space and weaker for secondary stock. The RICS UK Commercial Property Monitor for Q2 2026 reported an investment enquiries net balance of minus 8%, up from minus 11% in the previous quarter, and an all-sector occupier demand balance of minus 5%, the least negative reading since Q2 2025. Twelve-month capital value expectations stood at plus 29% for both prime industrial and prime office, while secondary office and secondary retail values were still expected to fall.
What I have noticed this year is that lenders are following that split closely. Prime and good secondary industrial investments are getting competitive terms quickly, while secondary offices are getting more questions about energy performance, re-letting costs and the strength of the local market. A good investment is still very fundable, and the work is in presenting the leases and tenants so the lender sees the quality before it sees the sector label.
Commercial investment mortgages: frequently asked questions
What is a commercial investment mortgage?
It is a long-term loan to buy or refinance commercial property that is let to tenants, such as shops, offices, industrial units or mixed use buildings. The lender relies on the rent to repay the loan, so the leases and the tenants are assessed alongside the property.
Is a commercial buy to let mortgage the same thing?
Yes. Commercial buy to let, commercial property investment mortgage and commercial investment mortgage all describe a loan secured on commercial property let to third parties. It differs from an owner-occupier commercial mortgage, where the borrower's own business occupies the building.
How much can I borrow on a let commercial property?
The loan is the lower of the maximum loan to value, usually 60% to 75%, and the amount the rent supports at the lender's interest cover or debt service cover ratio. On many let properties the rental cover test sets the loan before the loan to value does.
What interest cover ratio do lenders require?
Many lenders look for rent of around 125% to 150% or more of the annual interest, tested at the pay rate or a stressed rate, and debt service cover of around 1.25 times on loans with capital repayments. Requirements vary by lender and property type.
What are commercial investment mortgage rates?
Variable rates start from around 1.2% over Bank of England base rate for the strongest cases and typically sit at 2% to 4% over base, with fixed rates priced at application. Bank Rate is 4%, raised from 3.75% on 5 November 2026. Rates and lending criteria are subject to change by lenders without notice.
Can I buy commercial property through a limited company?
Yes. Most commercial investors buy through a limited company or SPV and almost every commercial lender will lend to one, usually with personal guarantees from the directors. Take tax advice on the structure before you buy.
Does lease length affect the mortgage?
Yes. Longer unexpired leases and later break dates support higher loan to value and better pricing. A lease ending soon on a single-let property reduces what lenders will advance and may mean bridging until a new lease is signed.
Can I get a mortgage on a vacant commercial property?
Term lenders want rent in place, so a vacant or largely vacant building is usually funded with a commercial bridging loan first and refinanced onto an investment mortgage once tenants are signed. Owner-occupiers buying vacant premises for their own business are assessed differently.
Can I finance a portfolio of commercial properties together?
Yes. Portfolio facilities secure several let properties under one loan or linked loans, with one set of covenants and often better pricing. Lenders look at the total rent roll, the spread of tenants and sectors and the overall loan to value.
Do you arrange commercial investment mortgages in Scotland and Wales?
Yes. We arrange commercial investment mortgages from £250,000 across England, Scotland* and Wales. In Scotland the security is a standard security. Northern Ireland is outside our coverage.
Related
Loan to value bands, cover ratios and lender criteria are indicative, subject to change and depend on the property, the leases and the borrower. Your property may be repossessed if you do not keep up repayments on a mortgage or any other debt secured on it.
Send us the address, the rent roll and the lease summaries. We will run the loan to value and rental cover tests and tell you what the property will support.
Call 03300 100313*Minimum loan for Scotland bridging, commercial and development finance cases is £1,000,000, on mainland Scotland in and around Glasgow, Edinburgh and other major cities. We do not arrange finance in Northern Ireland.
Talk to us about your commercial mortgage options
Tell us the loan size and what you are buying, building or refinancing. We call you back to talk through which lenders fit the deal, the likely terms and what each lender will ask for.
- Tell us about the case. Two minutes on the form, or call us.
- We match the lenders. We test the deal against commercial mortgage lenders across the market, then call you with the options.
- We package and submit. One complete application to the lender you choose, managed through to offer and completion.
03300 100313Monday to Thursday 9am to 5pm, Friday 9am to 4pm. Closed weekends.
“Due to slightly challenging employment status (startup founder) we were really struggling to secure a suitable mortgage going through 5 mortgage brokers before we found Fox Davidson.”
“Fantastic service, completed our mortgage from initial enquiry to formal offer within a calendar month.”
“Fantastic, fast, and able to secure a better mortgage for us than others.”