For purchases and remortgages, Fox Davidson can secure a rate for you now. We can then review rates for you before completion and if they have dropped we will request the lender moves you to the lower rate. Get in Touch

B8 and B2 Use Class: Industrial Planning Rules and Finance

B8 is storage or distribution, B2 general industrial. What each covers, B8 planning, the 500 sq m B2 to B8 right, and how lenders finance industrial units.

Last updated: 15 November 2026

B8 is the use class for storage or distribution, including open-air storage, and B2 is general industrial: any industrial process that is not light enough to sit in Class E(g). Both survived the 2020 rewrite of the Use Classes Order in England, while B1 offices and light industry moved into Class E(g). For finance, the class tells a lender what the building can lawfully be used for, which tenants could take it and what environmental risk sits in the ground. B8 logistics draws the strongest lender appetite of any commercial class; B2 is financeable but more due diligence heavy.

B8storage or distribution
B2general industrial
500 sq mB2 to B8 without permission (England)
E(g)where B1 went on 1 Sept 2020

What is B8 use class?

B8 is use for storage or as a distribution centre. The legal wording in the Use Classes Order is short: use for storage or as a distribution centre. The Planning Portal confirms it includes open-air storage. Typical B8 property includes logistics sheds, warehouses, trade counter storage, cold stores, self-storage and open storage yards. Ancillary offices inside a warehouse usually take the B8 character of the main use rather than counting as a separate office use.

Watch the edges. A trade counter selling mostly to visiting members of the public can drift into retail, which is Class E(a). A yard storing minerals or scrap is sui generis, not B8. A distribution unit with heavy night-time lorry movements may have planning conditions on hours that a valuer and an incoming tenant will both care about.

What is B2 use class?

B2 covers industrial processes other than those in Class E(g). Class E(g)(iii) takes any industrial process that can be carried out in a residential area without harming its amenity by noise, vibration, smell, fumes, smoke, soot, ash, dust or grit. Anything heavier is B2. Think vehicle repair with spraying, fabrication, food processing at scale, engineering and manufacturing. The Planning Portal notes that incineration, chemical treatment, landfill and hazardous waste uses are excluded from B2; several of those are sui generis under article 3(6).

What happened to B1 use class?

In England, B1 was revoked on 1 September 2020 and its three parts went into Class E(g). B1(a) offices became E(g)(i), B1(b) research and development became E(g)(ii), and B1(c) light industry became E(g)(iii). A unit permitted as B1 before 2020 now sits in Class E, which means it could lawfully switch to a shop, gym or clinic without a planning application, subject to any conditions on the permission. That flexibility can lift alternative use value on a small industrial estate close to housing.

Wales still has B1, B2 and B8. Scotland uses Class 4 business, Class 5 general industrial and Class 6 storage or distribution.

B8 planning: what changes are allowed without a planning application?

In England the main industrial permitted change is B2 to B8, up to 500 sq m. Class I of Part 3 of the General Permitted Development Order, as substituted on 1 August 2021, permits a change of use from B2 to B8, but not if the change relates to more than 500 sq m of floor space in the building. Most other moves, including B8 to B2, B8 to Class E and Class E to B8, need planning permission. Planning conditions and Article 4 directions can remove or restrict rights on individual sites.

ChangeEnglandScotlandWales
General industrial to storageB2 to B8 permitted up to 500 sq mClass 5 to Class 6 permitted up to 235 sq mCheck the Welsh GPDO with the council
Storage to business or officeB8 to E(g) needs permissionClass 6 to Class 4 permittedCheck the Welsh GPDO with the council
Business to storageE(g) to B8 needs permissionClass 4 to Class 6 permitted up to 235 sq mCheck the Welsh GPDO with the council
General industrial to businessB2 to E needs permissionClass 5 to Class 4 permittedCheck the Welsh GPDO with the council

The Scottish column follows council guidance on the Town and Country Planning (Use Classes) (Scotland) Order 1997 and the Scottish permitted development rules. Confirm the position with the planning authority before relying on it.

How do lenders value B2 and B8 property?

On the lease, the tenant, the building's specification and the ground it stands on. For a let unit the valuer capitalises the rent at a market yield, then tests it against comparable sales and lettings. For an owner occupier, lenders look at both the property value and the business's ability to service the loan. B8 logistics with good eaves height, yard depth, loading doors and motorway access is the most liquid industrial stock. Older B2 units with low eaves, asbestos roofs or poor EPC ratings are valued more cautiously.

  • Environmental: B2 and some B8 uses trigger a desktop environmental report at least. Fuel tanks, spraying, plating and waste handling can lead to a Phase 1 or Phase 2 survey.
  • EPC and MEES: lenders check the EPC because a sub-standard rating can stop a unit being let.
  • Lawful use: the valuer reports on the lawful use. A B8 unit that has been trading as B2 without consent is a red flag.
  • LTV: lenders do not publish LTV caps by use class, but our use class lender appetite guide shows the indicative ranges we see for B2 and B8.

For term lending see industrial and warehouse mortgages and the wider commercial mortgages hub.

When does industrial property need bridging or development finance?

Bridging covers the gap between buying and letting; development finance covers building new space. A commercial bridging loan fits an auction purchase, a vacant unit that needs a new roof or EPC upgrade before it can be let, or a site that needs a change of use before a mortgage lender will take it. Bridging Trends for Q3 2026 put the average bridging rate at 0.77% a month, the average LTV at 59% and average completion at 41 days. Development finance funds speculative or pre-let new build warehouses and is sized on cost and gross development value; a pre-let to a strong tenant widens the lender pool considerably.

Model example, figures rounded and illustrative, not a live quote

Owner occupier buys a 1,800 sq m B8 warehouse for £2,000,000. A commercial mortgage at 70% LTV is £1,400,000. At an illustrative 6.5% interest rate on a 20-year capital and interest basis, the monthly payment is about £10,438. The lender will test that against the business's profits and the property value, and may ask for an environmental desktop report.

If the same unit had been B2 with 600 sq m of the floor to switch to storage, Class I would not cover it, because the change exceeds 500 sq m. The buyer would need planning permission for the change of use, and a lender would value on the current lawful use until it was granted.

Model the repayment in our commercial mortgage calculator.

More use class guides: the full use class order, Class E, C1 to C4 residential classes, sui generis uses, the old A and D classes and Class Q barn conversions.

Frequently asked questions

What is B8 use class?

Use for storage or as a distribution centre. The Planning Portal confirms it includes open-air storage. Warehouses, logistics sheds, self-storage and distribution hubs usually fall in B8.

What is B2 use class?

General industrial: an industrial process other than one falling within Class E(g). In practice, manufacturing and processing that could not be carried out in a residential area without harm to amenity through noise, vibration, smell, fumes, smoke, soot, ash, dust or grit.

Can I change B2 to B8 without planning permission?

In England, Class I of the General Permitted Development Order allows a change from B2 to B8 for up to 500 sq m of floor space in the building. Larger changes need a planning application.

What happened to B1 use class?

In England B1 offices, research and development and light industry moved into Class E(g) on 1 September 2020. B1 still exists in Wales. In Scotland the equivalent is Class 4 business.

Do lenders prefer B8 to B2?

Generally yes. Modern logistics and storage units attract the widest lender pool. B2 units can be financed well too, but lenders will usually want environmental reporting because past processes can leave contamination.

Can I use bridging to buy an industrial unit?

Yes. A commercial bridge suits auction purchases, vacant units that need work before letting, and quick completions. The exit is usually a commercial investment or owner occupier mortgage once the unit is let or occupied.

Rates and lending criteria are subject to change by lenders without notice.

B2, B8 and Class E(g) wording and GPDO Class I checked on legislation.gov.uk and the Planning Portal on 27 October 2026; Scottish permitted changes from council guidance on the 1997 Scottish Order. Welsh permitted changes not reviewed in detail. Bridging Trends Q3 2026 data published 10 November 2026. Nothing here is a recommendation or tax/legal advice. Your property may be repossessed if you do not keep up repayments on a mortgage or any other debt secured on it. Fox Davidson arranges finance from £250,000 in England, Scotland* and Wales.

Fox Davidson arranges industrial and warehouse mortgages and commercial bridging from £250,000, with no broker fee where the lender pays us commission. Send us the unit, the lease or your business accounts, and we will tell you which lenders will compete for it.

Call 03300 100313

*Minimum loan for Scotland bridging, commercial and development finance cases is £1,000,000, on mainland Scotland in and around Glasgow, Edinburgh and other major cities. We do not arrange finance in Northern Ireland.

Speak to us

Talk to us about your commercial mortgage options

Tell us the loan size and what you are buying, building or refinancing. We call you back to talk through which lenders fit the deal, the likely terms and what each lender will ask for.

  1. Tell us about the case. Two minutes on the form, or call us.
  2. We match the lenders. We test the deal against commercial mortgage lenders across the market, then call you with the options.
  3. We package and submit. One complete application to the lender you choose, managed through to offer and completion.

03300 100313Monday to Thursday 9am to 5pm, Friday 9am to 4pm. Closed weekends.

“Due to slightly challenging employment status (startup founder) we were really struggling to secure a suitable mortgage going through 5 mortgage brokers before we found Fox Davidson.”
Tom G, Google review
“Fantastic service, completed our mortgage from initial enquiry to formal offer within a calendar month.”
Mark G, Google review
“Fantastic, fast, and able to secure a better mortgage for us than others.”
Jack W, Google review

Request a callback


    We use your details only to respond to your enquiry. See our privacy notice.